Compressor Parts Central

Champion low-oil switch conversions

Identify the installed control before replacing an older low-oil shutdown switch. Use the pump designation, switch style and actual control voltage to choose the appropriate conversion reference.

Install an oil monitor on a pump without one

Pump does not have an oil monitor installed. Match the exact pump model.

Installed pump/configurationKit reference
R10, R15, PL15, S12, S20CC1007124
R30, PL30, S40CC1007125
R40, PL40CC1007127
R70, PL70CC1007128
RV15CC1007129
RV30CC1007166

Installation instruction reference: CQF3275.

Retrofit the older red-reset-button LOSC

Compressor built before December 1, 2004 with the red reset button switch. Match exact pump designation and HU/automatic tank drain configuration.

Installed pump/configurationKit reference
R10, R15, S12, S20CC1153359
R10HU, R15HU, S12HU, S20HUCC1153370
R30, S40CC1153360
R30HU, S40HUCC1153372
R40CC1153361
R40HUCC1153373
R70CC1153358
R70HUCC1153374
RV15CC1153363
RV15 W/AUTO TANK DRAINCC1153375
RV30CC1153364
RV30 W/AUTO TANK DRAINCC1153376
PL15CC1153365
PL30CC1153367
PL40CC1153368
PL70CC1153369

Installation instruction reference: CQF3276.

Replace crushed-ring-style LOSC

Compressor built between December 1, 2004 and May 23, 2016 with crushed-ring-style LOSC; source names basic NEMA 1 and NEMA 4 controls. Confirm installed style and electrical configuration.

Kit: CC1156494

Published kit contents

Replace O-ring-style LOSC

Compressor shipped after May 23, 2016 with O-ring-style LOSC. Confirm the installed electrical configuration; the separate 115 V panel rule applies when that panel is present.

Kit: CC1153308

Published kit contents

Replace LOSC on the 115 V control-panel configuration

Control panel has 115 V control voltage/transformer. Source states units began shipping with this configuration in February 2018. Confirm the actual panel/control voltage before choosing this kit.

Kit: TEN008855

Published kit contents

The September 2018 conversion sheet lists one 2009222 O-ring in this kit. Quantities in a complete LOSC assembly drawing describe that assembly and must be checked separately.

At the May 23, 2016 transition, confirm the installed switch style. The older range refers to manufacture and the later range refers to shipment. Current supersessions and kit availability require manufacturer verification.

Source: Champion Low Oil Shutdown Control (LOSC) Oil Monitor Kits, September 2018, page 1.